Hi Guys, most of the above comments are pretty accurte but the problem with the vinyl "bubbling" is referred to in the industry as delamination. It has happened to a small percentage of doors made using a spray adhesive and has effected all manufacturers which use this method. There is another method which uses a membrane film between the vinyl and the MDF. Its been very common in the UK and USA but has only been used in Australia by a handful of manufacturers for the last 5 or 6 years at most. Its now being marketed as ThermalFusion or TF. Our company has been using this method since it first came to the country and we haven't experienced ANY delaminations since we progressively switched to it. If you're considering vinyl wrap doors be aware that there is a difference in how they are made and it can have long term effects.